Every day Kollmorgen pushes the boundaries of motion to deliver optimized solutions that satisfy even the most demanding application requirements in the harshest of environments. This includes helping machine builders effectively meet the often complex and time-consuming requirements for ATEX certification.

The ATEX certification controls which machinery and equipment are allowed in explosive environments. Industries may include but are not limited to mining, oil and natural gas refining and flour mills. Ask customers a few open questions to see if they’re meeting the criteria:

1. Does the application environment in which your machine will operate have its own effective 
    source of ignition?
2. Will the motion components in your machine be used in a potentially explosive atmosphere?
3. Will your machine operate under normal atmospheric conditions?

If the application meets these criteria, with Kollmorgen they have a market leading option to meet the ATEX certification while also being able to leverage the co-engineering and high performance that Kollmorgen is able to provide.

With our in-depth application knowledge and rich technical experience, your customers can rely on Kollmorgen to overcome any certification challenge – whether the need is a standard, modified, or custom-built solution.

What does this mean for the machine builder?

Round Customer confidence that the equipment is fit for its intended purpose.
Round Reduced transactional costs (time & $) of multiple sets of testing and documentation.
Round Free trade of ATEX equipment within the European Union that otherwise would require testing and 
   documentation for each member state.
Round One supplier with a breadth of products that provide best-in- class performance including the 
   expertise to meet ATEX requirements.

Kollmorgen knows that motion matters and represents endless possibilities for innovation. Our engineering expertise and engineering capabilities enable us to deliver superior performing solutions for these demanding environments.

Kollmorgen can help customers achieve ATEX certification and deliver differentiated machines in explosive environments

KOLLMORGEN : Explosion Proof Synchronous Motor

Kollmorgen 
Explosion Proof
Synchronous Motor
sync_exp_proof_Medium
These permanent magnet DC (PMDC) motors are SCR-rated and adhere to NEMA standards. They are available in a variety of DC voltages, from 1/4 to 3/4 HP.
 FEATURES
Round Motor torque up to 1,500 oz-in (1059 N-cm)
Round 72 rpm at 60 Hz, 60 rpm at 50 Hz
Round 120 and 240 volt AC versions
Round UL Listed and CE Certified versions
Round UL Listed versions meet Class I, Division 1, Group D requirements
Round UL Listed versions have a conduit connection
Round CE Certified versions: CE 0081 Ex II 2G Ex d IIC T5
Round CE Certified versions have an integral 10 ft (3 M) cable
 CATALOGUE 
adobe-pdf Stepper and Synchronous Motors Catalog en-US revB

KOLLMORGEN : Explosion Proof Stepper Motor - MX Series

Kollmorgen MX Series
Explosion Proof
Stepper Motor
MX-Series-XP-Stepper_Medium
The explosion-proof MX Series provides hazardous-duty stepper motors suitable for use in Class 1, Division 1, Group D locations. They are available in NEMA 34 and 42 frame sizes (90 and 110 mm), and provide minimum holding torques from 1.27 to 9.82 N-m (180 to 1390 oz-in).
 FEATURES
Round MX09 models: NEMA 34 (90 mm) motors available in three stack lengths with minimum 
   torque ratings from 1.27 to 3.88 N-m (180 to 550 oz-in
Round MX11 models: NEMA 42 (110 mm) motors available in 2 stack lengths with minimum 
   torque ratings from 6.0 to 9.82 N-m (850 to 1390 oz-in)
Round Speeds up to 3,000 rpm provide for velocity demands of most high torque applications
 CATALOGUE
adobe-pdf Stepper and Synchronous Motors Catalog en-US revB

KOLLMORGEN : Explosion Proof Servo Motor - EB Series

Kollmorgen EB Series
Explosion Proof
Servo Motor
EP_Explosion_Proof_MEDIUM
These permanent magnet DC (PMDC) motors are SCR-rated and adhere to NEMA standards. They are available in a variety of DC voltages, from 1/4 to 3/4 HP.
 FEATURES
Round 1/4 to 3/4 HP, 90 volt, 1750 rpm
Round 1/4 to 3/4 HP, 180 volt, 1750 rpm
Round 1/3 HP, 12 volt, 1750 rpm
Round 1/3 to 3/4 HP, 24 volt, 1750 rpm
Round Patented anti-cog magnets for smooth low speed operation
Round Polyester-impregnated armature for electrical and mechanical integrity
Round High overcurrent capacity and dynamic braking
Round Rugged, fused commutator
Round TEFC and TENV configurations
Round Long life, constant force brush springs with field-replaceable brushes
Round Gasketed conduit box with large wiring compartment
Round NEMA or metric mounting
Round Large sealed bearings, standard
Round Class H insulation
Round Tachometer adapter kits available
 CATALOGUE
adobe-pdf PMDC Selection Guide KM SG 000182 RevA EN

 

< >